Accessories and Spare Parts Pres

● Accumulator tanks hold a reservoir of air and water down stream from the pump. The air acts as a cushion, absorbing pump and pressure fluctuations, smoothing the flow and making the system quieter. Accumulators allow the pump to reach shut-off pressure more smoothly which reduces the on/off cycle which gives better control of hot water delivery. ● Specifications: Internal Volume: 0.75L / 23... Read more »

● Water filter with rubber hose terminal ● Available with different output diameters:     - Ø 19 - 25 mm     - Ø 32 - 38 mm Read more »

● If using mains water supply (i.e. in a marina), the pressure can be reduced by up to 3 bar to prevent damage to the pipes. The hose is snapped in using a garden type hose connection (see part number 36.189.02). 3/4" male outlet thread.● Recess Ø: 69 mm● Internal overhang: 90/120 mm​● Possibility of white, chromed or stainless steel cover Read more »

● This switch is valid for Pressure Water Pump: 2.5 L-Min 2.4 Bar 12 V Diaphragm Pump   Read more »

● This switch is valid for Pressure Water Pump: 3.8 LPM 12 V Diaphragm Pump 17 L-Min 2.8 Bar 12 V Diaphragm Pump Read more »

● This switch is valid for Pressure Water Pump: 5 LPM 4 Bar 12 V Diaphragm Pump 18 LPM 4 Bar 12V Diaphragm Pump Seaflo Pump with Accumulator Read more »

● This switch is valid for Pressure Water Pump: 7 LPM 5 Bar 12V Diaphragm Pump Read more »

● Made of ABS   Model Volum Max pressure Fittings Hose adaptors included 16.127.00 0.75 L 8.6 bar 1/2" 2 a 13 mm   Read more »

16 AWG Car Adapter Wiring Harness with On / Off Switch Length: 94.5" Read more »

18 AWG wiring car adaptor Length: 11.81" Read more »

18 AWG wiring car adaptor with Battery Clip Length: 12.80" Read more »

18 AWG wiring harness with on-off switch, two 30-amp battery clips Length: 98.43" Read more »

●The Shurflo water inlet is a pressure reducing device that maintains the nominal pressure and avoids high pressure surges due to damage to the piping systems. All water inlets contain an internal backstop to stop reverse flow through the unit when the potable water pump is used. ● Prevents damage rpovocados by high pressure systems common facilities. This system leak-proof and resistant to pre... Read more »

● Maintenance kit / service kit Pressure switch 2.8 bar / 40 PSI with screws included ● Compatible with Jabsco / Flojet Triplex and Multiplex pumps ● Alternative to Flojet 2091040 Read more »

● Pressure switch - max 25psi for Pump 56082 Read more »

● Size: 51S01 1/2 "-14 MNPT ● Fitting type: Inline filter / filter 1/2 "-14 FNPT ● Mesh size: 50 ● Racor: 51F01 ● Bomba: SFDP1-045-040-41 Read more »

● Hose adaptor Ø: 19/20 mm ● Colour: White Read more »

● Accumulator tanks hold a reservoir of air and water down stream from the pump. The air acts as a cushion, absorbing pump and pressure fluctuations, smoothing the flow and making the system quieter. Accumulators allow the pump to reach shut-off pressure more smoothly which reduces the on/off cycle which gives better control of hot water delivery. ● Specifications: Internal Volume: 8L Ma Oper... Read more »

● Size: 3/4" Male Quick Attach ● Fitting type: 1/2" Hose Barb ● Mesh size: 50 ● Racor: 41F001, 41F003 y 41F004 Read more »

● Accumulator tanks hold a reservoir of air and water down stream from the pump. The air acts as a cushion, absorbing pump and pressure fluctuations, smoothing the flow and making the system quieter. Accumulators allow the pump to reach shut-off pressure more smoothly which reduces the on/off cycle which gives better control of hot water delivery. ● Specifications: Internal Volume: 0.75L / 23... Read more »