By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Register and take advantage of the discounts and advantages of being a Professional of Nautical
Join the more than 500 Nautical Professionals now
● The new THOR fin has a peculiar and unprecedented structure that combines the two central ribs in high modulus polypropylene, very reactive and a central area of the thermoplastic rubber with a convex section, assembled in a polypropylene blade. Two lateral nozzles located in the area where the flexion starts release the associated negative forces and allow the use of two high-response ribs. This combination causes a channeling and acceleration of water flow, which stabilizes and increases propulsion at equal effort.
● The inclination of the blade with respect to the foot pocket has increased by 5% compared to traditional diving models. This angulation provides greater efficiency and a more natural foot position during fluttering.
● Thor enjoys the exclusive 3-material injection system patented by Cressi, which provides an excellent combination of strength, power, comfort and aesthetics and the optimization of the requirements of each area of the fin:
● Main body of polypropylene: This material, inherited from apnea fins, has as its main characteristic the very fast transmission of the applied energy and its great structural rigidity. It is applied to the shovel and inner area of the sole sandwich. He is very nervous and reactive and facilitates a very agile and effective flutter. It has a stress-performance ratio clearly superior to traditional materials (natural rubber or thermoplastic, polyurethane, EVA). It also has a great resistance to breakage to the point that Cressi guarantees it for life for sports use
● Flexible elastomer: It is applied to the foot pocket and the areas that require flexibility and elasticity, since they influence the comfort of the diver: Footrest toe, interior of the sole and area of the instep in contact with the ankle. It is also assigned to the areas that require non-slip capacity: Inserts in the sole (area in contact with the ground) and anti-shock, such as the lateral nerves of the blade. The fusion of both materials is performed at the molecular level and its strength is guaranteed for life for sports use
● Polypropylene of the high module: Especially reactive, it is applied to the nervaturas of the blade and is responsible for providing rigidity and return to the blade. This material connects the critical point of transmission of energy (the instep) with the nerves in one piece, avoiding the usual loss of energy through excessively flexible components of the foot pocket that produce a heavy, slow and fatigue fluttering the instep .
It also uses several technologies common to the rest of the Cressi models:
● "Shoe design under the blade": Now increasing its angle by 5%, the blade comes directly from the top of the foot pocket, solidly joining the fin to the foot and transmitting all the effort generated by flapping without loss of energy through soft areas . This format allows the water to be channeled from the same ankle to the final edge of the blade, unlike traditional models, in which the foot pocket has no contribution to the advance. Apart from improving the directionality of the flutter, this design provides a performance between 10% and 15% higher than what would correspond to the fin for its blade surface.
● Thickness of the blade of decreasing profile "spina di pesce" to improve the directionality of the flutter and achieve a greater inertia of the final part of the fin
● Foot pocket reinforced in the upper area by a supplementary thickness and laterally by two prolongations of polypropylene from the upper to avoid the dispersion of energy in the process of transmission from the foot to the upper
● Calzante with three differentiated volumes, with the central area narrowed so that the foot remains firmly fixed inside and the transmission of the foot-foot-paddle effort is direct and precise.
EBS BUCKLE SYSTEM (black version)
● It combines new buckles of essential and hydrodynamic design, adaptable to all Cressi models, with a novel self-regulating strip made of pure latex with high elasticity. Latex is the most elastic material of nature and has the property of being able to elongate up to 8 times its length without breaking and with full elastic memory, that is, recovering the initial length. Applied to the strip of the fins gives us enormous advantages:
● Reduces the need for sizes since the same strip easily covers wide ranges of elongation.
● It allows a relationship of ease of placement vs fastening of the fin, well above the spring systems, precisely because of its high elastic coefficient (X8 against X1.5 of the spring).
● Eliminates the cumbersome need to regulate traditional buckles, a process that does not always guarantee the correct fixation of the heel, especially in novice divers or stressful situations during the kitting process.
● Allows, keeping the comfort flapping, a high level of pressure on the heel is essential to achieve a correct transmission of energy applied to the fin without loss of energy by "spring effect." • It assimilates the crushing of the neoprene of the shoe when descending and compressing the neoprene without loss of fixation
● It is easily replaceable and essential both conceptually and in its manufacture and assembly
● The natural latex used is of the highest quality without loads that alter its performance and guarantees high resistance to use, saltpeter and sun exposure.
● Tallas:
