By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Register and take advantage of the discounts and advantages of being a Professional of Nautical
Join the more than 500 Nautical Professionals now
2nd STAGE ELLIPSE MASTER CHROME
2nd stage ultra high-end tech polymers mixed composition semi-flexible sound absorbing dampers and engine noise components heavier titanium.
Pneumatically offset mechanism which guarantees exceptional smoothness-flow and delivery of rich air ratio and calibrated without a Venturi effect accentuated.
New micro-regulation knob oversized titanium inspiratory effort, with mechanism totally isolated from the external environment by double O-regulation: ensures smoothness and durability. The knob includes a nut for fine adjustment of respiratory effort (servicing).
Deflector Dive-PREDIVE to manage the Venturi effect. No metal parts assembly.
elliptical arm allowing even greater than much larger regulators, with an optical effect of much smaller size and greater convenience lever. 7,5x6cm small size, only 5% higher than those of Ellipse Titanium and lighter models of the offset market with only 205 gr.
Oversized membrane admission for greater inspiratory softness, the largest of its kind: 2810mm2, 12% models of high-end competitors. Contact plate cam with Teflon to reduce friction cam-disk.
Leva large pivot angle, greatly enhanced to convey accurately the inhalation effort and with minimum friction with the disc of the membrane.
Maximum inspiratory effort 4Mbar less than a total work of breathing of 0.60 Joules / L, four times below the EEC standards. Flow rate of 2500 L / min
Possibility of removing the entire mechanical box easily, which greatly facilitates maintenance.
heat exchanger located within the housing that prevents freezing air when diving in cold water.
Zone improved to reduce the inspiratory effort without impairing the sealing area and exhalation it is not necessary to reduce the thickness of the membrane. The design of the restraint exhalation membrane 100% directs flow channeled to the nozzles of the bow benefit from a strong venturi effect and bubbles away visual field without oversizing the mustache.
Technical specifications:
Engineering plastic + Stainless Steel
weight 205gr
measures 7.5x6cm
80cm hose SUPERFLOW
Venturi system: no
pneumatic compensation: Yes
Deflector Dive / Pre-dive: Yes
Micro-regulation inhalation effort: Yes
Average flow 2500L / min
STEP 1 T10 SC CHORME
1st stage membrane T overcompensated, very modern but at the same time, easy to maintain and very robust and reliable.
The wall thickness of the body are optimized to minimize its weight (380gr). A Satin Chrome coating protects the 1st stage of shock and erosion.
T configuration allows greater integration of the first phase profile of the fitting and therefore greater freedom of head movement of the diver. The mechanism runs transversely to the air inlet and the possible leakage of particles from the bottle to grab sobrepaar the filter does not directly affect the válvula.1ª stage membrane MC9 overcompensated, very modern but at the same time easy to maintain and very robust, reliable.
The HP seat is made of stainless steel AISI 316. Apart from the possibility of substitution in case of damage during maintenance, the composition of the seat, much harder than traditional brass fixed seats, longer service life and better resists the deforming action of the metal particles can introduced from the bottle.
Valve high strength polyurethane, oils and to hyperoxic mixtures.
The overcompensation mechanism ensures a slight increase of the intermediate pressure as the pressure drops of the bottle. The controller therefore provides maximum performance level in the final phase of the dive, notoriously the most critical.
An advanced study of the internal air circulation and a camera exclusive distribution channels the volume of air directly to the LP outlets have reduced to a minimum the pressure drop in forced breaths (0.5 bar), ensuring use with high performance in any situation.
The T10 has a kit optionally isolation and anti-freeze SC (Sealed Chamber) which completely isolates the diaphragm and spring from contact with water, making it ideal for operation in extremely low temperatures and with very dirty water.
Filter especially effective hat-shaped inserted without circlip. effective filtration area of 280mm2 by developing its particular design.
2 HP ports and 4 LP
It supplied in version INT (yoke) and DIN 300 bar. The thread of the DIN version is made of stainless steel instead of brass to ensure greater resistance if dropped or bumped.
Technical specifications:
Outputs high pressure (HP) 2 - 7/16 "Outputs low pressure (LP) 4 - 3/8"
System / compensation: overcompensated membrane filter type hat without circlip
rotating turret: no
Supplied air flow 4000 L / min (*)
intermediate pressure intermediate pressure drop 10.9 bar (150 bar) 0.5-1 bar
LP external adjustment: yes (Allen key)
Weight: 615g Int / DIN 480g.
Supply pressure (INT connection) 0-232 bar
Supply pressure (DIN connection) 0-300 bar
Tare pressure 9.2-9.6 bar
Tare scale regulation +/- 0.5 bar
_thumb_190x59.png "Barton")
