Fixed Tanks

● Tanks made in high density Polyethylene plastic, suitable for acids and fuels.● Complete with standard inspection porthole with cap,vent,air-vent terminal of 3/8” and fuel pick-up.   Model Capacity (Lt) A (mm) B (mm) C (mm) D (mm) Sender (10/180 Ω) SE9013 122 1400 420 251 341+100 SO3805     Read more »

Tanks made in high density Polyethylene plastic, suitable for acids and fuels. • Complete with standard inspection porthole with cap,vent,air-vent terminal of 3/8” and fuel pick-up.   Model Capacity (Lt) A (mm) B (mm) C (mm) D (mm) Sender (10/180 Ω) SE9016 480 740 1160 570 630 SO3815 Read more »

● Tanks made in high density Polyethylene plastic, suitable for acids and fuels.● Complete with standard inspection porthole with cap,vent,air-vent terminal of 3/8” and fuel pick-up.     Model Capacity (Lt) A (mm) B (mm) C (mm) D (mm) Sender (10/180 Ω) SE9017 122 1400 420 251 341 SO3805     Read more »

● Tanks made in high density Polyethylene plastic, suitable for acids and fuels.● Complete with standard inspection porthole with cap,vent,air-vent terminal of 3/8” and fuel pick-up.   Modelo Capacidad (Lt) A (mm) B (mm) C (mm) D (mm) Transmisor (10/180 Ω) SE9018 360 1350 715 320 470 SO3807     Read more »

Tanks made in high density Polyethylene plastic, suitable for acids and fuels. Complete with standard inspection porthole with cap,vent,air-vent terminal of 3/8” and fuel pick-up.   Model Capacity (Lt) A (mm) B (mm) C (mm) D (mm) Sender (10/180 Ω) SE9019 300 860 830 465 515+105 SO3812   Read more »

● Tanks made in high density Polyethylene plastic, suitable for acids and fuels. ● Complete with standard inspection porthole with cap,vent,air-vent terminal of 3/8” and fuel pick-up.   Model Capacity (Lt) A (mm) B (mm) C (mm) D (mm) Sender (10/180 Ω) SE9023 300 860 830 465 515+40 SO3812     Read more »

● Manufactured in compliance with ISO21487:2013-05 regulations and EC certified. ● Reinforced walls and breakwaters available in different sizes depending on the model. ● Supplied with mass socket and 4 mounting brackets. ● Level sensor to be ordered separately. ● Fuel: Benzina / Diesel ● Capacity: 370 L ● Measure: 1300x800x370 +(77) h ● Float max length 36 cm ● Vent Ø: 16 mm ● Intake Ø: 50 m... Read more »

● Made of crosslinked polyethylene type-tested for petrol. ● Made in compliance with ISO 21487 standards, RINA CE type-tested. ● Equipped with 10/180 - 240/330 ohm universal frequency level indicators, already installed and tested.   Referencia Capacidad Planta Altura Ventilación Entrada Salida Versión 52.032.14 207 L 980x580 mm 440 mm 16 mm 39 mm 10 (2) - 52.032.16 271 L 1300x560 mm 383... Read more »

● Equipped with brass plug, flotation protection and floating protection that absorbs shocks when necessary. Itm Capacity L Fuel Measures Max length for float cm Vent Ø mm Inlet plug Ø mm Tap plug Ø inches 52.035.09 62 Petrol 660x535x245 (+60) h 25 16 built-in 38-50 90° elbow, 3/8" female thread + preset for 2nd tap plug Read more »

●  Multipurpose tanks, made of high quality polyethylene and thick walls, preventing oxidation and less likely to condensate compared to a metal tank. ●  Its fabrication is seamless so it is impossible for them to leak. ●  The tank is suitable for regularly available diesel fuel up to an ambient temperature of 100 °C. ●  The content level can be viewed from the outside for e... Read more »

● Rigid tank of 40, 60 or 80 litres. ● This reservoir incorporates a center point for mounting an SAE flanged float along with 5 bolt knockouts. (Does not include the float). ● Material: high quality polyethylene. 1. Fixed hose connector Ø38 mm for filling and 16 mm for ventilation line. 2. Ø8 mm swivel hose connection with collection tube for suction. 3. Ø8 mm swivel hose connector for fu... Read more »

● Rigid tank of 40, 60 or 80 litres. ● This reservoir incorporates a center point for mounting an SAE flanged float along with 5 bolt knockouts. (Does not include the float). ● Material: high quality polyethylene. 1. Fixed hose connector Ø38 mm for filling and 16 mm for ventilation line. 2. Ø10 mm swivel hose connection with collection tube for suction. 3. Ø10 mm swivel hose connector for ... Read more »

• Multipurpose tank, can be used with any liquid, fresh water, gray, black or diesel. • Material: high quality polyethylene. • Features a manhole cover and is ready for the appropriate ILT connection kit. • At the bottom is a 38mm connection that can be drilled for interconnect or drain purposes. • Due to the large inspection hole (140 mm), the tank complies with the fuel di... Read more »

Nuova Rade fuel tanks are used for storing petrol, diesel or fuel containing ethanol or methanol, before it is transmitted to the boat engine. Sogliola line of horizontal fuel tanks is produced from polyethylene material in black color to avoid rust and has a longer lifetime, contrary to metal tanks. It contains a fuel output for Ø8mm hose and a fuel supply input with an 45 degrees angled outl... Read more »

Ercole line of horizontal fuel tanks is made of polyethylene material in black colour to avoid rust and has a longer lifetime, contrary to metal tanks. This line consists of a full range of 9 models complying with international standards and is used for fuel collection and storage. All contain a fuel output for Ø8mm hose and a fuel supply input that is either threaded with a cap, either with a... Read more »

Article Capacity Lt A mm B mm D mm Sender 10/180Ω mm Sender 240/33Ω cm 01.9031 188 1250 650 270+47 250 mm 25 cm Read more »