Hatches

De aluminio anodizado y metacrilato resistente a los golpes, de perfil muy bajo. Con pestaña de 15 mm. Aprobadas C.E. para montaje en cubiertas y cabinas. Tapa superior de abertura en cualquier posición y con resistencia ajustable. Marco superior de sólo 25 mm. y fuerte inclinación que les confieren una estética inigualable. Marco inferior mínimamente protuberante con un pequeño rebordeque, con... Read more »

• Fit to a flat surface with a maximum tolerance of +/- 1mm • Fastening size at hinge section use (M6 / 1/4") • Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA • Cut-out dimensions change if a Trimkit is used • Acrylic thickness window: 12 mm     Reference Size Lewmar Ref.  X Y Z R X1 Y1 R1 Weight 19.410.03 03 399303030 246 mm 3... Read more »

Aprobada C.E. para montaje en cubiertas y cabinas. Marco superior de tipo alto que incorpora una junta hueca de gran poder de estanqueidad. Marco inferior con reborde que limita la entrada del agua que corre por cubierta cuando la escotilla está abierta. Bisagras integradas no protuberantes. Nuevo sistema para sujeción de la tapa en cualquier posición de apertura, mediante compás interior de re... Read more »

● Sliding hatch designed for steering coverings and enabling ventilation and radiation. For flat mounting. The look of Pilot hatches perfectly matches Low e Medium Profile models. Code Model External Size X<->Y (mm) Profile size X1<->Y1 (mm) Length of race T (mm) Recess Flange projection 1945060 60 581 577 373 15 1945078 78 844 790 638 15 Read more »

Round framed white portlight with a thick frame made of UV-resistant high-grade ASA, providing resistance to damage and chemical solvents. ASA (acrylonitrile styrene acrylate) filament is the perfect multi-purpose 3D printing thermoplastic, suitable for many different applications.   Features: • UV resistant • 8 mm thick plexiglass window, that can stay open. • Designed for external use. •... Read more »

• Hinges with integrated friction to leave the portlight open in any size, fast-acting and secure handles. • Supplied complete with aluminium finishing counter flange, mounting screws, smoked glass. Installation by means of a ring nut with threaded holes that makes the operation easily and quickly achievable by one person. Ideal for bulkheads up to 31 mm. • CE approved. • Acrylic... Read more »

• Made of anodised aluminium and smoked glass, 180° self-locking opening in any position thanks to integrated clutch. • Handles for inside and outside opening (if applicable) already fitted. • Locking in ventilation position. • Anti-intrusion security lock. • Acrylic and replaceable seals, handles, clutches. • With minimum roof overhang. • CE approved for zone 2. &... Read more »

● Made of aluminium, white lacquered with epoxy resins, hinged opening, smoked tempered glass; EC type approval.   Code Opening (mm) Aperture required (mm) Outer (mm) Overhang (mm) 1972400 277 306 376 24 1972401 395 420 492 24 1972402 493 518 588 24   * Bomar sun-shades for hatches are designed for installation in a matter of minutes. Slide locking. With a special knob, th... Read more »

New ultra-low hatch that combines practicality, aesthetics and ease of installation. • Robust, lightweight frame. The hatch is positioned 10 mm above the deck, making it a flush installation. • The cut-out dimensions match those of the Low Profile, Medium Profile and Ocean series; this ensures easy retrofitting without modifications and additional deck drainage. • The bottom fram... Read more »

Designed specifically for new boats. These hatches are the most suitable for new constructions since the cover is embedded to cover the hatch. After installation the hatches are completely embedded in the roof leaving it smooth and without visible lines. They are made of 12mm thick dark smoked acrylic with a polished anodised aluminum frame. Suitable for category A, zone II designs.   Deck... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »