Switches

Necesario para el buen funcionamiento de los molinetes de ancla LEWMAR. Read more »

- Manual-Off-Manual switch - For use only in 12/24V. Maximum load per switch 15A - Coated with electrostatic paint - Completely wired and ready to install - Dimensions: 7 x 6.5 cm   Read more »

♦ Dimensions: 170x 80 x 50 mm ♦ 12 / 24 V ♦ 2 Channels ♦ IP67 protection ♦ Normally open contacts with a capacity of 3A per output ♦ Extendable cable up to 4m, 3-pole cable   Read more »

  ♦ Dimensions: 170x 80 x 50 mm ♦ 12 / 24 V ♦ 3 Channels ♦ IP67 protection ♦ Normally open contacts with a capacity of 3A per output ♦ Extendable cable up to 4m, 4-pole cable     Read more »

● This switch, usually installed on the cockpit, is made by a fixing plaque and by a three position switch (Up-Off-Down). ● Dimensions of the plaque: 85 x 50 mm. Read more »

● This rocker switch has a modern and practical design. It is reliable and watertight and it is supplied with the apposite case to make simple and sure the installation. Read more »

● This new hand held remote control model Thetis1002 has an elegant and functional design. The soft rubber case, which covers sideways the remote control, allows a safe and handy taking under any condition.  This hand held remote control is rated with IP66 and supplied with waterproof plug and socket rated IP67. The extending flexible cable (aprox 4 metres) gives the maximum freedom on boa... Read more »

Length: 75 x 62 mm Read more »

● Includes a rubber coated watertight "Up Down" switch with spring release, a safety fuse holder and two control indicator LED lights ● Dimensions: 80 x 60 mm ● Fuse: 6 x 32  Read more »

  ● Activates all the Lewmar remote-control switches; fully watertight, enables remote-control switch installation in a position that is protected from humidity. Read more »

● Activates all the Lewmar remote-control switches; fully watertight, enables remote-control switch installation in a position that is protected from humidity. Read more »

● Watertight, enables remote-control switch installation in a position that is protected from humidity. Upper part made of mirror polished AISI 316 stainless steel. Read more »

● Easy to install this device is a switch which works simply pushing the foot on the button. the base is in stainless while the cover to prevent accidental engagement is in composite. The button is in special marine rubber able to withstand UV ray and the marine environment. Available in up and down version. Description Black - Grey / Down Voltage 10-30Vdc Operative Temperature -10º / +6... Read more »

● Easy to install this device is a switch which works simply pushing the foot on the button. the base is in stainless while the cover to prevent accidental engagement is in composite. The button is in special marine rubber able to withstand UV ray and the marine environment. Available in up and down version. Description Red - Grey / Up Voltage 10-30Vdc Operative Temperature -10º / +60º ... Read more »

● This new remote chain counter model Thetis 5003 has been specifically designed to give the full control in anchoring. It is a reliable and practical instrument, technologically advanced, specifically design for use in marine environments. The external casing, completely waterproof, gives the maximum freedom on board during anchoring manoeuvring, by to a soft rubber cover. Provided with an evo... Read more »

● Made of reinforced plastic, watertight, suitable for deck mounting; fitted with openable hatch; special compact size. ● External diameter: 80 mm ● Hole diameter: 8 mm ● Lewmar code: 68000928 Read more »

● Enables the windlass to go into forward gear or back gear; can be mounted near the driving seat or wherever is more convenient; includes pin for assembling or disassembling on the deck.   ● Universal version ● 12/24 volts Read more »

●  Without cable ties, plug or panels and with load always perfect by rechargeable battery, the radio chain counter Thetis 7003 gives finally all the freedom of manoeuvres and the comfort of reading in the anchoring operations. Specifications:   ● Underwater housing complies with IP67   ● Power: 10-24 Vdc   ● High visibility LCD display with 8 levels of backlighting and contrast   ● Multilingua... Read more »

● Watertight, enables remote-control switch installation in a position that is protected from humidity. ● Upper part made of mirror polished AISI 316 stainless steel. ● Measures (AxB): 76 x 83 mm Read more »

● The chaincounter EV011 is compact, small and extremely performing in order to be employed with equipments which are already provided with windlasses' control units, but do not have any chaincounter. It is easy to be installed and compatible with any kind of windlass on the market, it displays the measure of the chain lowered in metres or feet. Guaranteed protection rating IP56 and univer... Read more »

● In case the windlass is not equipped with this accessory. Read more »

● Up/down switch for windlass control, activates the windlass even in the helm area. Read more »

● HRC is the new Quick range of multipurpose hand-held remote controls, designed to for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connect... Read more »

● HRC is the new Quick range of multipurpose hand-held remote controls, designed to for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. ● HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a ... Read more »

● Remote control with three buttons for windlass on both ascent and descent. Read more »

Spare sensor for chain counter Read more »

Quick bracket for HRC HRC handheld remote control. Read more »

● The Maxwell, high strength and water resistant units have a stabilized UV waterproof diaphragm. ● Maximum current of 150 Amp and suitable for 12 V or 24 V ● Nickel-plated copper contacts allow reliable corrosion-free operation   Ref Hoop material  Height (mm) Depth (mm) P19001 Cromed 20 49 P19008 Black Plastic 20 49 Read more »

● This device, made by marine stainless steel (INOX), is a switch that works simply by pushing the foot on the button.  ● The button is in special marine rubber able to withstand UV ray and the marine environment. ● Availble in UP and DOWN version. ● 2 Years Limited Warranty.   Code 636075 636074 Description Black / INOX Red / INOX Voltage 12 - 24V dc Operative temperature -10 : +60 ... Read more »

Lofrans’ mini remote control is designed to work with our range of windlasses. The remote control can also be used to operate other onboard equipment such as thrusters, passerelles, cranes, etc. ● Easy to install and setup, simple to use. ● Small form factor makes it ideal to carry it anywhere on-board. ● Supports up to 4 independently control channels (12/24V - 10A). ● Zero Power consumption w... Read more »

The 2 buttons wired windlass remote is the latest design of IP rated hand-held remote from Lewmar. The new unit is designed for remote operation of all Lewmar windlasses. The wired remote is constructed with high-strength, glass-reinforced PP combined with a high-density rubber gasket to ensure robust durability and a secure grip whatever the conditions. These units are supplied complete with a... Read more »