Quicksilver

● Used on all Mercury/Mercruiser engines, outboards, sterndrives, and transom assemblies.  ● 340 gr spray bottle Read more »

● For use with the light coils, DC power is supplied to recharge a 12 V battery. ● The kit contains the voltage rectifier, cables and mounting hardware. ● Compatible with Mercury / Mariner 4/5 hp outboards with 2 cycles and FourStroke. ● Check with your engine number Read more »

Use it to protect newly repaired or reassembled motors. It does not contaminate the engine lubricants and dissolves completely after the initial start of the engine. It is recommended for engine components that are susceptible to wear at start-up, for example: ● Bearings ● Lobes of the camshaft ● Taqués ● Rockers ● Joint bolts ● Can be used during assembly and rep... Read more »

Quickare is a fuel treatment that can be used in any refueling to: ● Maximize engine performance with any octane rating. ● Help control corrosion, varnish and resin buildup and phase separation associated with fuels with mixtures of ethanol. ● Help control moisture and corrosion problems associated with fuels without ethanol mixture. ● Cleans existing deposits of varnish and... Read more »

Quickleen should be used throughout the navigation season to: ● Quickly and efficiently remove carbon deposits from carburetors and injectors, intake valves, spark plugs, piston heads and cylinder heads. ● Avoid detonation of the engine or blocking of the pistons ● Increase the service life of the spark plugs ● 40 ml is used to treat 25 liters of fuel, a 355 ml bottle treat... Read more »

Add the Quickstor stabilizer to the fuel to treat the fuel system before storing your boat for a prolonged period to: ● Prevent failure and oxidation in normal fuels and with ethanol mixture ● Stabilize the fuel for a period of up to one year ● Prevent corrosion of the fuel system ● Avoid the formation of resin and varnish in the fuel and its accumulation in fuel lines and t... Read more »

The Quicksilver Four Stroke Outboard replaceable screw-on type canister oil filter. Fits the 75/90/115 hp. FourStroke outboard (USA 1B3668232B094995, 1731 cc.) and the 150 hp. EFI FourStroke outboard. " Read more »

● Fuel tank with built-in meter and gauge. ● Capacity: 12 L. ● Top carrying handle, comfortable to carry, small size. ● Equipped with a threaded fuel line fitting and a manual vent plug.   Dimensions:               368mm x  248mm x 229 mm  Read more »

The low penetration hose (compliant with the EPA) has a quick connect type coupling with double seal at the end of the reservoir and a quick clamp type connection at the end of the motor. In this set of 8ft (2.44m) a non-EPA-compliant pear is included. Compatible cpn Force 40hp and larger models (1993 and newer), Force 9.9 / 15/25 hp (1998) and all Mercury / Mariner outboards that use loop-type... Read more »

For use with 5/16 "(8m) D.I hoses and applications where a 1/4" NPT thread is required. It is screwed into our support for the water separator filter. Brass coupling with 0.250 inches of D.I to use only with gasoline. This material must not be used with diesel fuels. Individual price, sold in multiples of 2. Read more »

Adapt our threaded pumps for 3 / 8-16 quart, liter, and 2-1 / 2 gallon gear lube to fill the gearbox. Compatible with Mercury / Mariner of 4/5 hp (1987 and later), FourStroke of 4/5/6 hp, 225 EFI FourStroke, models of the year 2005 and later, FourStroke of 8 / 9.9 hp, models of the year 2006 and later, FourStroke 25/30 EFI, FourStroke of 15/20 hp (351 cc), all Mercury / Mariner outboards of Jap... Read more »