By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Register and take advantage of the discounts and advantages of being a Professional of Nautical
Join the more than 500 Nautical Professionals now
● The RS150 GPS sensor is a high performance, 72 channel, remote mount GPS sensor for Raymarine navigation systems.
● The RS150 offers fast 10 Hz position updates and improved accuracy.
● The RS150 is also a GNSS receiver and supports the use of the GLONASS global navigation satellite system.
● 72-channel GPS receiver.
● Fast position updates at 10 Hz.
● Differential satellite compatible with GPS. Space Based Augmentation System (SBAS) enabled compatible with WASS, EGNOS, MSAS and GAGAN.
● A GLONASS-compatible GNSS receiver.
● Low power consumption: 30 mA (1 LEN).
● Compatible with SeaTalkng and NMEA2000 (by using a cable adapted for DeviceNet).
● Designed for low profile surface mounting or optional pole mounting.
● Nominal supply voltage: 12 V DC, supplied via a N2K bus
● Operating voltage range: 8 - 32 V DC
● Power consumption: 0 mA max. (NMEA LEN = 1)
● Operating temperature: -25ºC to +55ºC (-13ºF to 131ºF)
● Relative humidity: Max. 93%
● Waterproof: IPx6/7
● Sensitivity: High sensitivity - acquisition at -163 dBm
● Differential acquisition: Automatic
● Position accuracy: (95%)<15m
● Position accuracy with SDGPS: (95%)<5m
● Speed accuracy: (95%)<0.3 kt
● Time to first position update from a cold start: <2 minutes (typically <45 seconds)
● Time to first position update from a warm start: < 8 seconds -72 hours standby time, battery allows warm start
● Geodetic Datum: WGS84
● Mounting: Surface/railing/mast
1. GPS receiver
2. Gasket for mounting
3. SeaTalkng branch cable (3 meters)
4. Documentation
5. 3 M4 x 40mm threaded rods (used for surface mounting)
6. 3 grip nuts (used for surface mounting)
| Display | Do you need a GPS antenna or an external GPS sensor? |
| ● a-Series, c-Series, e-Series and eS-Series MDF with integrated GPS |
● Normally, you will not need an external GPS device, as the multifunction display has a built-in GPS receiver. ● For example, inside a steel cockpit where the multifunction display cannot receive GPS signals. |
| ● gS Series MFDs | ● gS Series systems require the use of a Raymarine RS150 external GPS sensor as part of the network. |
| ● Older E-Series widescreen models (E90W, E120W, and E140W) | ● E-Series widescreen displays do not have built-in GPS and can use the RS150 receiver connected to the SeaTalkng backbone cable |
| ● Early C-Series Classic models (C80 and C120) E-Series Classic models (E80 and E120) | ● Raymarine Classic multifunction displays require a SeaTalk1 to SeaTalkng converter to connect an RS150 receiver |
_thumb_190x59.png "Osculati")
