Vetus

● Front panel 97 x 95 mm ● Bottom 90 mm ● Installation hole Ø 52 mm ● Compatible with other VETUS bow propeller panels  ● Available in complete or compact version ● They are watertight and equipped with a switched socket to connect extra equipment (max 3 A) ● It incorporates operation in the case of change of direction of rotation ● Automatic disconn... Read more »

● Gasoil odors no longer escape ● Easy to install ● Activated carbon material to absorb odors ● It is recommended to place an overflow ● Measures: L 148 x W 150 x H 162 mm ● Suitable for Ø16, 19 or 25 mm connections   Ref Description L x An x Al (mm) Tube Ø (mm) NSF16D anti-odor filter 148 x 150 x 162 16 NSF19D anti-odor filter 148 x 150 x 162 19 NSF25D anti-odor filter 148 x 150 x 162... Read more »

● Oils of Gasoil no longer escape ● Easy to install ● Activated carbon material to absorb odors ● It is recommended to place an overflow ● Measurements: L 107 x W 111 x H 111 mm ● Suitable for Ø16 connections Read more »

All Vetus heaters include robust mounting brackets for safe installation and a complete set of connections with overpressure valve, plus a 1.5 kW heating electric resistance. • They make use of excess heat from the engine to provide hot drinking water. They are also equipped with an electrical resistance to be used when the engine is not running.  • They use a spiral tube to heat the ... Read more »

They simultaneously charge 2 or 3 battery groups from any power source with a negligible voltage drop due to the use of mosfet transistors instead of diodes. A fully discharged battery will not be able to discharge another battery. This battery separator guarantees the automatic distribution of the charging current from the alternator and / or battery charger. Once the engine has started, the a... Read more »

● VRLA sealed and maintenance-free (does not contain any loose electrolyte) ● The electrolyte is absorbed by the fiberglass sheets that separate the plates from each other ● No leaks even when the battery falls and the housing is damaged ● The battery can even be sent by air ● Made in the EU   Specifications:   Voltage 12 V Capacity C20 170 Ah Capacity ... Read more »

This equipment includes: ● Pump type HTP2010 (white) ● Cylinder type MTC3008 ● Nylon hose Ø 8 mm type HS04N (15 metre roll) ● Hydraulic steering oil 1L type VHS1 ● All the necessary recores   Specifications ● Max. Torque: 294 Nm (30 kgm) (216 ft.lbs) ● Number of wheel turns 3,4 ● Piston stroke 150 mm ● Volume 67 m3 ● Length of tiller arm 12... Read more »

Suitable for installing on the side of the helmet. The 10 mm "smoke" acrylic panel opens on an anodized matt aluminum frame. As optional we can supply the lacquered frames in white or black color. The opening type is without adjustable adjusters from the inside or outside. The gates can remain open in any position due to the friction hinges. When closed, the closing knobs ensure total tightness... Read more »

Portillos medium service Suitable for installation in superstructures of the boat. They come with a 10 mm acrylic paper "smoke" in an opening frame. The type of opening is without adjusters visible from the inside or outside. The gates can remain open in any position due to the friction hinges. In the closed position, the closing knobs guarantee a total tightness. As standard they are supplied ... Read more »

Portholes medium service Suitable for installation in superstructures of the boat. They come with a 10 mm acrylic paper "smoke" in an opening frame. The type of opening is without adjusters visible from the inside or outside. The gates can remain open in any position due to the friction hinges. In the closed position, the closing knobs guarantee a total tightness. As standard they are supp... Read more »

Portholes medium service Suitable for installation in superstructures of the boat. They come with a 10 mm acrylic paper "smoke" in an opening frame. The type of opening is without adjusters visible from the inside or outside. The gates can remain open in any position due to the friction hinges. In the closed position, the closing knobs guarantee a total tightness. As standard they are supp... Read more »

● Suitable for bulkhead thickness from 3 to 18 mm ● Anodized aluminum mosquito net included ● Interior frame in stainless steel and acrylic panel 8mm colo smoke   Ref External measurements A (mm) Ø Measurements hole B (mm) Ø Mosquito net type PWS31A1 220 198 HOR31S PWS32A1 260 238 HOR32S   ● All hatches and gates are CE marked in accordance with the Recreational Craft Directive ● All ... Read more »

● Suitable for bulkhead thickness from 3 to 18 mm ● Anodized aluminum mosquito net included ● Interior frame in stainless steel and acrylic panel 8mm colo smoke Ref External measurements A (mm) Ø Measurements hole B (mm) Ø Mosquito net type PMS23A1 346 x 199 322 x 177 HOR23S ● All hatches and gates are CE marked in accordance with the Recreational Craft Directive ● All wi... Read more »

Designed specifically for new boats. These hatches are the most suitable for new constructions since the cover is embedded to cover the hatch. After installation the hatches are completely embedded in the roof leaving it smooth and without visible lines. They are made of 12mm thick dark smoked acrylic with a polished anodised aluminum frame. Suitable for category A, zone II designs.   Deck... Read more »

These white synthetic trim are designed to cover the space between the hatch and the inner lining. The depth of the frame can be cut to size to suit any cover thickness up to 50mm. The hinged mosquito net can be easily removed for easy cleaning.   Referencia Hatch HCM2020 LIB2032L HCM3420 LIB3432L HCM4141 LIB4155L HCM4532 LIB32..L HCM5037 LIB37..L HCM5050 LIB50..L HCM6262 LIB62... Read more »

These white synthetic trim are designed to cover the space between the hatch and the inner lining. The depth of the frame can be cut to size to suit any cover thickness up to 50mm. The hinged mosquito net can be easily removed for easy cleaning.   Ref Hatch HCM2626 MAG2626SL, ALT2626SL, FGH2626 HCM4242 MAG4242SL, ALT4242SL HCM4444 FGH4444 HCM4633 MAG4633SL, ALT4633SL HCM4747 MAG474... Read more »

These white synthetic trim are designed to cover the space between the hatch and the inner lining. The depth of the frame can be cut to size to suit any cover thickness up to 50mm. The hinged mosquito net can be easily removed for easy cleaning.   Ref Hatch HCMD420 ALTD420SL HCMD520 ALTD520SL HCMR420 ALTR420SL HCMR520 ALTR520SL Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

With hand-polished and anodised frame with rounded corners with 32 or 55mm radius and a 10mm thick dark smoked acrylic cover. The exhaust and deck hatches come with adjusters that allow the lid to remain open at almost any angles up to 90º. A special friction hinge allows the ventilation hatches to remain open at any angle up to 180º. The LIBERO type is suitable for designs of category A, zone ... Read more »