Vetus

Portillos medium service Suitable for installation in superstructures of the boat. They come with a 10 mm acrylic paper "smoke" in an opening frame. The type of opening is without adjusters visible from the inside or outside. The gates can remain open in any position due to the friction hinges. In the closed position, the closing knobs guarantee a total tightness. As standard they are supplied ... Read more »

Portholes medium service Suitable for installation in superstructures of the boat. They come with a 10 mm acrylic paper "smoke" in an opening frame. The type of opening is without adjusters visible from the inside or outside. The gates can remain open in any position due to the friction hinges. In the closed position, the closing knobs guarantee a total tightness. As standard they are supp... Read more »

Portholes medium service Suitable for installation in superstructures of the boat. They come with a 10 mm acrylic paper "smoke" in an opening frame. The type of opening is without adjusters visible from the inside or outside. The gates can remain open in any position due to the friction hinges. In the closed position, the closing knobs guarantee a total tightness. As standard they are supp... Read more »

● Suitable for bulkhead thickness from 3 to 18 mm ● Anodized aluminum mosquito net included ● Interior frame in stainless steel and acrylic panel 8mm colo smoke   Ref External measurements A (mm) Ø Measurements hole B (mm) Ø Mosquito net type PWS31A1 220 198 HOR31S PWS32A1 260 238 HOR32S   ● All hatches and gates are CE marked in accordance with the Recreation... Read more »

● Suitable for bulkhead thickness from 3 to 18 mm ● Anodized aluminum mosquito net included ● Interior frame in stainless steel and acrylic panel 8mm colo smoke Ref External measurements A (mm) Ø Measurements hole B (mm) Ø Mosquito net type PMS23A1 346 x 199 322 x 177 HOR23S ● All hatches and gates are CE marked in accordance with the Recreational Craft Directive ● All wi... Read more »

Designed specifically for new boats. These hatches are the most suitable for new constructions since the cover is embedded to cover the hatch. After installation the hatches are completely embedded in the roof leaving it smooth and without visible lines. They are made of 12mm thick dark smoked acrylic with a polished anodised aluminum frame. Suitable for category A, zone II designs.   Deck... Read more »

These white synthetic trim are designed to cover the space between the hatch and the inner lining. The depth of the frame can be cut to size to suit any cover thickness up to 50mm. The hinged mosquito net can be easily removed for easy cleaning.   Referencia Hatch HCM2020 LIB2032L HCM3420 LIB3432L HCM4141 LIB4155L HCM4532 LIB32..L HCM5037 LIB37..L HCM5050 LIB50..L HCM6262 LIB62... Read more »

These white synthetic trim are designed to cover the space between the hatch and the inner lining. The depth of the frame can be cut to size to suit any cover thickness up to 50mm. The hinged mosquito net can be easily removed for easy cleaning.   Ref Hatch HCM2626 MAG2626SL, ALT2626SL, FGH2626 HCM4242 MAG4242SL, ALT4242SL HCM4444 FGH4444 HCM4633 MAG4633SL, ALT4633SL HCM4747 MAG474... Read more »

These white synthetic trim are designed to cover the space between the hatch and the inner lining. The depth of the frame can be cut to size to suit any cover thickness up to 50mm. The hinged mosquito net can be easily removed for easy cleaning.   Ref Hatch HCMD420 ALTD420SL HCMD520 ALTD520SL HCMR420 ALTR420SL HCMR520 ALTR520SL Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio... Read more »

With hand-polished and anodised frame with rounded corners with 32 or 55mm radius and a 10mm thick dark smoked acrylic cover. The exhaust and deck hatches come with adjusters that allow the lid to remain open at almost any angles up to 90º. A special friction hinge allows the ventilation hatches to remain open at any angle up to 180º. The LIBERO type is suitable for designs of category A, zone ... Read more »

With hand-polished and anodised frame with rounded corners with 32 or 55mm radius and a 10mm thick dark smoked acrylic cover. The exhaust and deck hatches come with adjusters that allow the lid to remain open at almost any angles up to 90º. A special friction hinge allows the ventilation hatches to remain open at any angle up to 180º. The LIBERO type is suitable for designs of category A, zone ... Read more »

With hand-polished and anodised frame with rounded corners with 32 or 55mm radius and a 10mm thick dark smoked acrylic cover. The exhaust and deck hatches come with adjusters that allow the lid to remain open at almost any angles up to 90º. A special friction hinge allows the ventilation hatches to remain open at any angle up to 180º. The LIBERO type is suitable for designs of category A, zone ... Read more »

With hand-polished and anodised frame with rounded corners with 32 or 55mm radius and a 10mm thick dark smoked acrylic cover. The exhaust and deck hatches come with adjusters that allow the lid to remain open at almost any angles up to 90º. A special friction hinge allows the ventilation hatches to remain open at any angle up to 180º. The LIBERO type is suitable for designs of category A, zone ... Read more »

• With hand-polished and anodised frame with rounded corners with 32 or 55mm radius and a 10mm thick dark smoked acrylic cover. • The exhaust and deck hatches come with adjusters that allow the lid to remain open at almost any angles up to 90º. • A special friction hinge allows the ventilation hatches to remain open at any angle up to 180º. • The LIBERO type is suitable for desig... Read more »

They have an anodized glossy satin frame with a 10mm thick acrylic lid and are designed for ocean use, suitable for category A, zone I designs. These hatches can be opened 180º from the inside and outside without obstructions in the opening. They have a ventilation position and are completely watertight. The hole sizes of these hatches conform to many of the ones currently on the market.  ... Read more »

Robust cover made of lightweight plastic resistant to UV rays, suitable for 2-speed HD windshield wiper motors. • Valid for VETUS engines of the RW and DIN types. • When installing the plastic cover, you must reduce the maximum bulkhead thickness indicated by 3 mm. • Complete with bottom cover. Read more »

● These arms are made of polished high-gloss stainless steel and first-class black synthetic components. ● Distance between center centers 45 mm ● Anchorage 7.2 x 2.5 mm ● DIN cone anchor   Ref Arm Length (mm) Motor type DINPD black pantograph 308 - 393 DIN DINPDX black pantograph 386 - 471 DIN Read more »

● These arms are entirely made of polished stainless steel, high gloss, durable and durable (AISI 316) ● Straight anchor   Ref Arm Length (mm) Motor Type SSAS simple stainless steel 280 - 366 RW SSAL simple stainless steel 395 - 481 RW SSAX simple stainless steel 473 - 559 RW Read more »

● These arms are entirely made of polished stainless steel, high gloss, durable and durable (AISI 316) ● Straight anchor   Ref Arm Length (mm) Motor type SSAD black pantograph 308 - 393 RW SSADX black pantograph 386 - 471 RW Read more »

● These arms are entirely made of polished stainless steel, high gloss, durable and durable (AISI 316) ● DIN cone anchor   Ref Arm Length (mm) Motor type DINSD black pantograph 308 - 393 DIN DINSDX black pantograph 386 - 471 DIN Read more »