● High efficiency
With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industry standard.
And once fully charged battery consumption is reduced to 0.5 watts, five to ten times less than the industry standard.
● Adaptive algorithm load of 6 stages: initial check-load-absorption-overhaul-float-storage
The Blue Power charger features "adaptive" management microprocessor controlled battery. His "adaptive 'feature will automatically optimize the charging process based on the use to be given to the battery.
● Storage Mode: Less maintenance and aging when the battery is not in use
The storage mode is activated when the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V / cell (13,2 V for 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week, he turns up the tension absorption level to 'equalize' the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of battery failure.
● Also charging Li-Ion batteries (LiFePO₄)
The LiFePO₄ batteries are charged with a simple algorithm initial load-absorption-float.
● NIGHT setting (night) and LOW (low)
When the NIGHT or LOW modes are active, the output current is reduced to a maximum of 25% of rated output and charger will be completely silent. The NIGHT mode ends automatically after 8 hours. The LOW mode can be terminated manually.
● Protection against overheating
The output current will decrease as the temperature rises to 50 ° C, but the Blue Power charger will not fail.
● Eleven LED status indicators
Charging algorithm: TEST (check) / BULK (initial charge) / ABSORPTION (absorption) / RECONDITION (overhaul) / FLOAT (floating) / STORAGE (Storage) / READY (ready) to adjust MODE button: NORMAL (14.4 V ) / HIGH (14.7 V) / RECONDITION / LI-ION
| Blue Power Charger |
12V 1 Output (15/20/30A) |
| Input voltage range |
180 - 265 VCA |
| Charge current, normal mode |
15/20/30 A |
| Charge current, Night or Low |
4/5/8 A |
| Efficiency |
93% |
| No load power consumption |
0.5W |
| Frequency |
45-65 Hz |
| Number of outputs |
1 |
| Charge voltage "Absorption" |
Normal: 14,4 V - High: 14,6 V - Li-ion: 14,2 V |
| Charge voltage "float" |
Normal: 13,8 V - High: 13,8 V - Li-ion: 13,35 V |
| Charge voltage "storage" |
Normal: 14,4 V - High: 14.6 V - Li-ion: 14.2 V |
| Charge Algorithm |
6-stage adaptive |
| Can be used as power supply |
Yes |
| Protection |
Battery reverse polarity - Output short circuit - Over temperature |
| Operating temp. range |
-20º to +50º C |
| Humidity (non condensing) |
Max. 98% |
| Enclosure |
|
| Material & Color |
Aluminium (Blue RAL 5012) |
| Battery connection |
Screw terminals 13 mm2 / AWG6 |
| 230V AC connection |
Cable of 1.5 meter with CEE7/7 plug |
| Protection category |
IP22 |
| Weight |
1.3 KG |
| Dimensions (AlXANXP) |
235 x 108 x 65 mm |
| Standards |
|
| Safety |
EN60335-1 , EN 60335-2-29 |
| Emission |
EN 55014-1 , EN 61000-6-3, EN 61000-3-2 |
| Immunity |
EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |
_thumb_190x59.png "Barton")
