Vetus

● These air intakes are made of silicone. Silicone rubber is a very flexible synthetic material with a temperature range between -100ºC and + 200ºC. It is resistant to ultraviolet light and does not discolor, so it always looks new. These sockets are removable and can rotate after manually loosening the splined ring of the base. The pink rings and cover rings are made of rigid plastic and the i... Read more »

These air intakes are made of silicone. • Silicone rubber is a very flexible synthetic material with a temperature range between -100ºC and + 200ºC. • It is resistant to ultraviolet light and does not discolor, so it always looks new. • These sockets are removable and can rotate after manually loosening the splined ring of the base. • The pink rings and cover rings are made of r... Read more »

● These air intakes are made of silicone. Silicone rubber is a very flexible synthetic material with a temperature range between -100ºC and + 200ºC. It is resistant to ultraviolet light and does not discolor, so it always looks new. These sockets are removable and can rotate after manually loosening the splined ring of the base. The pink rings and cover rings are made of rigid plastic and the i... Read more »

● Stainless Steel AISI 316 ● Both the hoods and the rings are made of cast stainless steel. The housing goran and are removable and the clamping ring can be tightened manually.    The threaded nut and the cover ring are supplied as standard.   Air flow area (cm2) Ø Cover opening (mm) 44,2 75 Read more »

● Stainless Steel AISI 316   ● Both the hoods and the rings are made of cast stainless steel. The housing goran and are removable and the clamping ring can be tightened manually. The threaded nut and the cover ring are supplied as standard.     Type Air flow area (cm2) Ø Cover opening (mm) JER316WR 44,2 75 TOM316wR 78,6 100 YOG316WR 122,8 125 Read more »

● Prevents water from entering the fan ● This separator drains any water that enters the boat from the air intake and can be completely closed by the built-in mushroom aerator made of AISI 316 stainless steel. ● Maximum thickness of 25 mm   Type Ø (mm) Max. thick cover BOX75 75 25 BOX100 100 25 BOX125 125 25 Read more »

● Prevents water from entering the fan ● This separator drains any water that enters the boat from the air intake and can be completely closed by the built-in mushroom aerator made of AISI 316 stainless steel. ● Maximum thickness of 25 mm   Type Ø (mm) Max. thick cover BOXS75 75 25 BOXS100 100 25 Read more »

● Synthetic Box ● Drain any water that enters the boat from the air intake and can be completely closed by the built-in mushroom aerator.    The cover nut is frabriada with synthetic material or stainless steel and can be easily mounted on the separators by means of the screws and nuts that are supplied. ● Not suitable for S-type air intakes ● Water separator for DONALD, JERRY, TRAMON, LIBEC ● ... Read more »

● Synthetic Box ● Drain any water that enters the boat from the air intake and can be completely closed by the built-in mushroom aerator. The cover nut is frabriada with synthetic material or stainless steel and can be easily mounted on the separators by means of the screws and nuts that are supplied. ● Not suitable for S-type air intakes ● Water separator for TOM and CHINOOK ● Free Flow Area C... Read more »

● Synthetic Box ● Drain any water that enters the boat from the air intake and can be completely closed by the built-in mushroom aerator. The cover nut is frabriada with synthetic material or stainless steel and can be easily mounted on the separators by means of the screws and nuts that are supplied. ● Not suitable for S-type air intakes ● Water separator for YOGI and SAMOEN Free Flow Area Cm2... Read more »

● Can be mounted invisibly on covers up to 25mm thick ● They can be mounted on the water separator using a counter frame and then screwed into the cover ● Manufactured with high gloss polished stainless steel AISI 316 and adapted to stainless steel air intakes and water separators   Type Indicated for A Ø mm B Ø mm C Ø mm Thickness mm BOXAD75 BOX75, BOXS75 167 95 5.2 6 BOXAD100 BOX100, B... Read more »

Complete set: stainless steel screw, male cover ring and fixing wrench   Tipo Descripción RING75 Ring and screw AISI 316 for air intake DONALD, JERRY, TRAMON and LIBEC RING100 Ring and screw AISI 316 for air intake TOM and CHINOOK RING125 Ring and screw AISI 316 for air intakeYOGI and SAMOEN Read more »

● In addition to combustion air, the engine also requires sufficient ventilation air to dissipate residual heat. The required volume of ventilation air is approximately the same as the necessary combustion air that is apox. 6.1 m3 per kW (4.5 m3 per cv) per hour based on a maximum air velocity of 3 m / sec.  ● This type is made of stainless steel with anodized aluminum grids &nbs... Read more »

● In addition to combustion air, the engine also requires sufficient ventilation air to dissipate residual heat. The required volume of ventilation air is approximately the same as the necessary combustion air that is apox. 6.1 m3 per kW (4.5 m3 per cv) per hour based on a maximum air velocity of 3 m / sec.  ● Both the frame and the grilles are made of polished high-gloss stainle... Read more »

● In addition to combustion air, the engine also requires sufficient ventilation air to dissipate residual heat. The required volume of ventilation air is approximately the same as the necessary combustion air that is apox. 6.1 m3 per kW (4.5 m3 per cv) per hour based on a maximum air velocity of 3 m / sec. The design of are based on these principles.   ● This type has an anodized polished alum... Read more »

● Suction tube, very flexible pressure ● This tube can connect the MOFI ventilation box to the type 178 exhaust fan ● Roll 30 m, price per meter   Type Description Interior Ø mm Exterior Ø mm  Weight kg/m  VHOSE152 extract, fan 152 158 0,2 Read more »

● Suction tube, very flexible pressure ● This tube can connect the MOFI ventilation box to the type 178 exhaust fan ● Roll 30 m, price per meter   Type Description Interior Ø mm Exterior Ø mm  Weight kg/m  VHOSE178 abstract, fan 180 186 0,2 VHOSE178N abstract, fan, soundproof 180 186 0,2 Read more »

For ventilation gates All aeration portlets can optionally be supplied with a synthetic water separator (except ASVREC type)   Ref Specification DBOX020 Water separator for ASV, SSV, SSVL, tipo 20 DBOX025 Water separator for  ASV, SSV, SSVL, tipo 25 DBOX030 Water separator for ASV, SSV, SSVL, tipo 30 DBOX040 Water separator for  ASV, SSV, SSVL, tipo 40 DBOX050 Water separator for  ... Read more »

● Air ventilation with rotating connector ● This ventilation grille is suitable for an engine up to 16 hp. For a 60 hp engine 4 grids (2 on port and 2 on starboard) will be needed. ● It is made of stainless steel and has a synthetic rotating elbow that works as a water separator. ● Area of air flow is 0.66 dm2 ● Hose not included Read more »

Note: All VETUS screw-in filters comply with CE (ISO 1088) and ABYC (relative to installation in the engine room) requirements and have withstand a 2.5-minute fire test. ​• With a maximum capacity of 360 liters per hour, based on a patented diesel fuel flow system in which water is separated from the fuel before the fuel flows back through the filter element. This way damage can be avoided... Read more »

​• With a maximum capacity of 380 liters per hour, based on a patented diesel fuel flow system in which water is separated from the fuel before the fuel flows back through the filter element. This way damage can be avoided and a motorcycle start is guaranteed ​• Note: All VETUS screw-in filters comply with CE (ISO 1088) and ABYC (relative to installation in the engine room) requiremen... Read more »

• With a maximum capacity of 460 liters per hour, based on a patented diesel fuel flow system in which water is separated from the fuel before the fuel flows back through the filter element. This way damage can be avoided and a motorcycle start is guaranteed • Note: All VETUS screw-in filters comply with CE (ISO 1088) and ABYC (relative to installation in the engine room) requirements and ... Read more »

● The screw-in fuel filters are fitted as standard with straight pipe connectors 10 mm in diameter. ● Sometimes other connectors may be preferred, so we offer 90 mm diameter 90 ° diameter connectors, as well as straight and curved 8 mm diameter connectors. ● Suitable for simple screw type filters 330VTE(P)B, 340VTE(P)B y 350VTE(P)B   Tipo Diámetro tubo Modelo Rosca FFS0800 8 mm Recto M16 x... Read more »

● Control panel with built-in time lapse device when reversing the direction of rotation. ● Offers optimum safety and performance. ● Watertight to IP66 ● Features VOLTAGE (V) 12 and 24 V DIMENSIONS (HEIGHT X WIDTH) (MM) 85x85 IP65 IGNITION PROTECTION INTEGRATED DEPTH (MM) 90 CUTTING DIAMETER (MM) 75 With time delay yes Joystick CONTROL Read more »

● Using this adapter plate, installation of panels BPSE2, BPJE2, BPSSE or BPJSE in place of a BPS or BPJ panel is possible. Read more »

  ♦ Easy to use, panel-mounted Up/Down switches for remote windlass operation from the helm, fly bridge or cockpit. Suitable for use with dual-directional solenoids. ♦ Manufactured from marine-grade materials. ♦ Splash proof ♦ Suitable for 12 and 24 Volt DC use. ♦ Includes on/off switch and power indicator light Read more »

● Its high back and ergonomically shaped lateral supports make the Commander a very comfortable seat to sit in. ● Furthermore, this sizeable deluxe seat is the ideal addition to larger yatchs. ● Colour: White ● The Commander features a "flip-up" squab to enable comfortable steering when standing. Finished in maintenance free, water and UV resistan skai imitation leather, wic... Read more »

● Its high back and ergonomically shaped lateral supports make the Commander a very comfortable seat to sit in. ● Furthermore, this sizeable deluxe seat is the ideal addition to larger yatchs. ● Colour: Dark Blue ● The Commander features a "flip-up" squab to enable comfortable steering when standing. Finished in maintenance free, water and UV resistan skai imitation leather, wich is ideal for m... Read more »

● Luxurious chair with excellent support. ● The front part can be folded up for steering in a standing position. ● Use seat cover CCDS or CCSB to keep your seat clean. ● Supplied without pedestal, fits pedestals with slide only.   D1 D2 H1 H2 W1 W2 0T Hole Pattern (See drawing) Weight (Kg) 684 475 700 605 630 415 720 R 15 Read more »

● Vetus Mosquito Screen for Porthole Type PZ   Ref For models HOR61 PZ611 y PZ613 HOR62 PZ621 y PZ623 HOR63 PZ631 y PZ633 HOR64 PZ641 y PZ643 HOR65 PZ651 y PZ653 HOR66 PZ661 y PZ663 HOR67 PZ671 y PZ673 Read more »

● Vetus Ferrybench seat with adjustable backrest for 2 persons. ● Anodised aluminium hinges. ● Available in colour white with dark blue seams and blue with white seams. ● Supplied without pedestal D1 D2 H1 H2 W1 W2 0T Hole Pattern Weight (Kg) 570 375 460 380 900 900 - 2xR/2xS 15 Read more »

● Vetus seat Ferry helm chair with adjustable back rest. Ideal for fast boats. ● White with dark blue seams. D1 D2 H1 H2 W1 W2 0T Hole Pattern Weight (Kg) 570 375 460 380 420 420 706 R/2 6 Read more »

● Manually adjustable aluminium seat pedestal with slide and swivel (360º). ● Polished base.   Reference Height (H) Hole Pattern Foot Ø (D1/D2) Base Ø (D3) Weight (Kg) PCMS3040 300-400 R/S 73/87 228 6 PCMS3547 350-470 R/S 73/87 305 7 PCMS4363 435-635 R/S 73/87 305 7.8 Read more »

● Manually height adjustable aluminum seat pedestal with 360º swivel only. ● Anodised base.   Reference Height (H) Hole Pattern Pedestal Ø (D1/D2) Base Ø (D3) Weight (Kg) PCM3040 300-400 S 60/73 228 4 PCM3547 350-470 S 60/73 228 5 PCM4363 435-635 S 60/73 228 5.8 Read more »

ZWBH seals are developed for use with water lubricated stern gear. This updated monoblock design works in the same way as the trusted ZWB seals, with the addition of one extra lip seal (three total) for added security. • ZWBH seals can withstand temperatures between -15º and +85º and are suitable for Vetus bronze, steel or GRP stern tubes. • Minimal friction, oil and grease resistant... Read more »

● With this kit you have all you need to water lubricate your shaft assembly by using water from the main engine´s ran water cooling circuit.  Type Include Ref ZWBKIT T-piece (18-10-18 mm) TP1810 3 meters of 10 mm hose diameter DWHOSE10A 4 hose clamps (RVS304 9mm diameter 8-16mm) HCS08 Read more »